How do I add a DVD player to connect to a Sanyo TV

Connect a DVD player is compatible with the TV Sanyo Finally, a simple process, but the variety of types of items can be confusing. It 'nice to have a guide through the process to help you make sense of this sea of multicolored bushes.

Making the Connection :

Step 1 Determine the type of video connection. Sanyo your TV input jack on the back to accept audio and video from external sources. Depending on what year the TV, your preference, and the lines are available, these options are:
Composite: This red / white / yellow RCA cables are also installed, but since the signal of lower quality. Yellow transmits the video, while the red and white cables for transferring the audio signal. (This option will not give you surround sound.)
S-Video: A slightly better quality than composite video. You will need a separate cable for transmitting audio.
Component video: This method divides the video signal into three parts (hence the need for the three cables), so a better image of S-video. The image is generally not HDMI. You will need a separate cable for transmitting audio.
HDMI: An All-in-one solution that meets the highest quality video and audio are transmitted simultaneously. Most Sanyo televisions and DVD players have this option since 2007. If the devices that support HDMI is the best option.

Step 2 Determine the type of audio connection. They have few choices when it comes to audio. The choices you make, you hear the sound quality of your choice and cable. There are four possibilities:
Analog composite: This red and white RCA cables are the most common, but the lower quality of sound. This method does not transfer real surround sound. Use this method if you listen to the TV speakers.
Digital Coaxial: If you have a surround sound receiver or TV has digital audio inputs, you must use this method. An RCA cables can be used.
Digital Optical: If you use the cable over long distances, it can be more expensive for this cable. In most cases you do not hear a difference between optical and coax.
HDMI support option easier and better if your TV and DVD player.

Step 3 Hook It Up! When you connect directly to your Sanyo TV, select your audio / video cables and method of obtaining correct. The connection method you choose will require special cable --- It 'easy to see which cable goes where, because they are different in shape and measure only one way. You also have the appropriate label, such as "coaxial or component input." Think he did, the colors, if you use composite or component connectors (red, green, red, green, etc.). Sometimes there are more items of different types depending on the model TV. In this case, no matter if you're using.
Turn for the DVD player, DVD, and optimize your TV to the correct input channel by pressing the "Input" or "Input Select" on your remote until you get a picture.
If you are connected to a surround receiver, connect the appropriate cable for the DVD input on the back of the receiver the same way that it will be located directly to the TV. Playing a DVD, and change the input of the DVD receiver.